With over a decade of experience building with straw bales we have certainly learned a few things. Some of them might be useful to you:

• Buying Good Straw Bales – The first step in having a good straw bale house is to pay serious attention to the quality of your straw bales. The ideal bale is made of densely packed, long straw fibers. It is kept clean and dry. It is ideally tied with poly-pro twine or as a secondary option metal wire (metal can rust in some situations). It is best to have your bales custom made by the farmer, having them combine the grain just below the seed head, then mowing the straw near the ground (to get the longest fibers) and then baling the bales as tight as possible without bursting. If this is not possible look for bales that are not squishy, do not easily deform, and are heavy (but dry).
• Compression – For load-bearing buildings pre-compression seems like the way to go (from our experience of not doing so). You’ll also find compression to be useful in non-load bearing applications, by sizing the wall cavity to 1 inch less than the expected height of the bales. You can compress the straw bales using a piece of plywood and car jacks and a piece of plastic to help slide the bale. Having the bales compressed adds strength to the wall and keeps bales from slipping against each other.



• Re-tying and Modifying Straw Bales – Bales can be retied to any length using a bale needle. It is worth some effort to design a home to minimize retying but it is not so much effort that major design changes need to be made. Straw bales can also be modified using a chain saw to notch around framing members, electrical boxes, etc. Bales can have one string re-tied short so the bales can be curved around windows. Niches and other sculptural features can be added with a chain saw after the wall is in place.
• Light-clay-straw for filling voids – Straw bale walls will inevitably have voids that need filling, especially at the corners of bales. Stuff deep holes with dry straw at first and then start adding clay-slip to your straw so that the final stuff has a serious amount of clay. Work this clay straw into the cracks between bales to secure it into the wall. It will dry to a hard firm surface that can take plaster beautifully.
• Big Overhangs – It can’t be said enough that big overhangs will help protect your strawbale wall. If you want to do exterior plaster with earth this is essential. A two foot overhang at 8 feet high is a minimum for a place with frequent driving rainstorms. Be wary of gabled roofs that leave ends of buildings with an overhang 16 or 20 feet high that will provide almost no wall protection. Consider porches, trellises, and other landscaping to block rain and break up wind.



• Big window sills – Water running off of windows can damage plaster below the windows. By having a window sill that sheds water away from the building plaster can be preserved and leaks prevented.
• Passive Solar Design – When trying to incorporate passive solar heating it can be difficult with a load-bearing straw bale home to get enough window space on the south side of the building without losing structural stability. One can have posts and a beam for the south side alone but you must then plan for bale compression on the other sides.
• Earth Contact – In our climate, insulation is great but direct contact with the earth is what helps keep a straw bale home cool in the summer and easier to heat in the winter. See our information on Earthen Floors.
• Burlap to Connect Wood to Straw – One of the most serious plaster problem area is the interface between the straw and other materials such as wood. If the wood is to be plastered over we have had great success using burlap. Many straw bale books suggest metal lathe, chicken wire or stucco netting. Unless your are doing machine applied plaster avoid these at all costs! They are a pain to plaster around. You can take the burlap and staple it to the wood using a staple gun, overlapping it 3-4 inches onto the straw. Then coat it in clay slip and embed it in the infill coat of plaster (by ronni at www.dresshead.com). The burlap is an incredibly strong network of fibers that prevents the plaster from cracking at this juncture.
• Prevent Infiltration at the Edges – The effectiveness of insulation is greatly diminished if air can infiltrate the house. This often happens at the edges of doors, windows, ceilings, foundations, and wall sections. Careful plastering at these points can help but shrinkage occurs with drying and temperature changes and cracks can develop. Caulk can help but the ideal thing is to overlap plaster onto the rough framing and right up to the exposed trim